Project 2 - Making Project (Continue)

To do:

1. make the battery pocket.

2. connect to the keyboard with hack.

3. Test everything.



Right: Middle: Left:

- Battery Pocket have to make smaller which it will right fitting.

- Keyboard need to connect to program with using max/msp.

Project 2 - Making Project

To do:

1. make the patterns.

2. Fabric buttons at the back of the patterns

3. Connect the wire to the each of the LEDs at the Parallel circuit.

4. Connect the battery holder.

- The image of the pattern is Fire and Water wave and fabric each side of the scarf. also, fabric at the middle of the scarf (zig-zag pattern).

- buttons will hold the LED stronger and don't move around easier. after fit the LED into the button, fold legs which it cannot move anymore.

- parallel circuit drains battery much fater than series circuit. but, the brightness is much brighter.

- battery holder must connect parallel circuit. because, if it connects as series circuit, whole light will gone when one light is fault.

Project 2 - Get the Material

we need:

- LED - wires

- Soler - keyboard with hacked

- battery AA Cell (coin Battery) - thread

- Buttons - plain

- Scarf

* Get the LED as many as possible. one or two LEDs are not bright.

Project 2 - Human Computer Interface

Human Computer Interface: Wearable Garments.

There are heaps of wearable garment such as:

- cloth - Gloves
- scarf - Sunglasses
- shoes - Electronic Devices
- Socks - hat or cap and so on.

I choose: Scarf.

Reason:
* Easy to build the Design.
* The winter come soon.
* It looks cool.
* Less battery need.